首页
外语
计算机
考研
公务员
职业资格
财经
工程
司法
医学
专升本
自考
实用职业技能
登录
计算机
Why Have Formal Documents? First, writing the decisions down is essential.Only when one writes do the gaps appear and the(71
Why Have Formal Documents? First, writing the decisions down is essential.Only when one writes do the gaps appear and the(71
admin
2016-09-08
29
问题
Why Have Formal Documents?
First, writing the decisions down is essential.Only when one writes do the gaps appear and the(71)protrude(突出).The act of writing turns out to require hundreds of mini一decisions, and it is the existence of these that distinguishes clear, exact policies from fuzzy ones.
Second, the documents will communicate the decisions to others.The manager will be continually amazed that policies he took for common knowledge are totally unknown by some member of his team.Since his fundamental job is to keep everybody going in the(72)direction, his chief daily task will be communication, not decision一making, and his documents will immensely(73)this load.
Finally,a manager’s documents give him a data base and checklist.By reviewing them(74)he sees where he is,and he sees what changes of emphasis or shifts in direction are needeD.The task of the manager is to develop a plan and then to realize it.But only the written plan is precise and communicable.Such a plan consists of documents on what, when, how much, where, and who.This small set of critical documents(75)much of the manager’s work.If their comprehensive and critical nature is recognized in the beginning, the manager can approach them as friendly tools rather than annoying busywork.He will set his direction much more crisply and quickly by doing so.
(72)
选项
A、other
B、different
C、another
D、same
答案
D
解析
转载请注明原文地址:https://kaotiyun.com/show/IjRZ777K
本试题收录于:
软件设计师上午基础知识考试题库软考中级分类
0
软件设计师上午基础知识考试
软考中级
相关试题推荐
为了进行差错控制,必须对传送的数据帧进行校验。在局域网中常采用的校验技术是(6)。CRC-CCITT的生成多项式是(7);假设一个CRC生成多项式为G(X)=4+X+1,要发送的信息码为101011,则算出的CRC校验码为(8)。假设采用的生成多项式为 G
FTP是基于(36)实现的文件传输协议,使用此协议进行文件传输时,FTP客户和服务器之间建立的连接是(37),用于传输文件的是(38)连接。TFTP是基于UDP实现的简单文件传输协议,它共有五种协议数据单元PDU,其中数据PDU一次可以携带的数据最多为(3
协议数据单元是指对等实体之间传输的信息单元,ATM网络的协议数据单元称为(153)。 ATM适配层分为两个子层,这两个子层是(154)子层。(155)是对应于A类业务的ATM适配层,它提供的业务特点是(156)。如果要传送IP数据报,则需要(157)业务的
ADSL(非对称数字用户线)是采用(143)调制的接入技术,其下行速率为1Mb/s~(144),上行速率为640Kb/s~1Mb/s。ADSL接入互联网的两种方式是:(145)。Cable Modem又叫线缆调制解调器,它可以连接用户家中的PC机和(146
电路交换主要工作在物理层,传输单位是(46);分组交换工作于(47),它采用(48)方式从源点传送到目的地。异步传输模式(ATM)采用的交换技术是(49),传输单位是(50)。
假设用户Q1有2000台主机,则必须给他分配(1)个C类网络,如果分配给用户Q1的超网号为200.9.64.0,则指定给Q1的地址掩码为(2);假设给另一用户Q2分配的C类网络号为200.9.16.0~200.9.31.0,如果路由器收到一个目标地址为11
某CPU的主振频率为100 MHz,平均每个机器周期包含4个主振周期。各类指令的平均机器周期数和使用频度如表2.9所示,则该计算机系统的速度为平均约(5)兆指令/秒。若某项事务处理工作所要执行的机器指令数是控制程序(以访内、比较与转移等其他指令为主)220
某CPU的主振频率为100 MHz,平均每个机器周期包含4个主振周期。各类指令的平均机器周期数和使用频度如表2.9所示,则该计算机系统的速度为平均约(5)兆指令/秒。若某项事务处理工作所要执行的机器指令数是控制程序(以访内、比较与转移等其他指令为主)220
在WindowsServer2003中,默认情况下()组用户拥有访问和完全控制终端服务器的权限。
已知某子系统为外界提供功能服务,但该子系统中存在很多粒度十分小的类,不便被外界系统直接使用,采用(41)设计模式可以定义一个高层接口,这个接口使得这一子系统更加容易使用;当不能采用生成子类的方法进行扩充时,可采用(42)设计模式动态地给一个对象添加一些额外
随机试题
智齿冠周炎常形成瘘道,其常见部位为
(2009年)化学反应低温自发,高温非自发()。
石灰桩的成孔也是采用钢套管法成孔,然后在孔内灌入新鲜生石灰块,或在石灰块中掺入适量的水硬性掺合料粉煤灰和火山灰。利用生石灰吸取桩周土体中水分进行水化反应,此时生石灰的吸水、膨胀、发热以及离子交换作用,使桩周土体的含水量降低,孔隙比减小,使()。柱和
甲公司期末进行财产清查,发现如下情况:(1)现金盈余672元,原因待查。(2)现金盘盈原因无法查明,报经有关部门批准后进行会计处理。(3)盘亏设备一台,原价23700元,已提折旧18960元,原因待查。(4)该设
根据资源税法律制度的规定,纳税人采取分期收款结算方式销售应税产品的,资源税的纳税义务发生时间足()。
我国古代建筑中常用的木构架结构方式主要有()。
宪法的根本地位体现在()。
Justsevenyearsago,theTexasLegislatureprescribedthatallhighschoolersmustpasstwomathcoursesandgeometrytogradua
Argumentsmayconcernsuchunimportantmattersasstylesofdressorhairdos.(Passage1)
Accordingtothenews,theFrenchBicycleraceisgoingtobeheld
最新回复
(
0
)