首页
外语
计算机
考研
公务员
职业资格
财经
工程
司法
医学
专升本
自考
实用职业技能
登录
计算机
Traditional IP packet forwarding analyzes the (1) IP address contained in the network layer header of each packet as the packe
Traditional IP packet forwarding analyzes the (1) IP address contained in the network layer header of each packet as the packe
admin
2019-05-15
38
问题
Traditional IP packet forwarding analyzes the
(1)
IP address contained in the network layer header of each packet as the packet travels from its source to its final destination.A router analyzes the destination IP address independently at each hop in the network.Dynamic
(2)
protocols or static configuration builds the database needed to analyze the destination IP address(the routing table).The process of implementing traditional IP routing also is called hop—by—hop destination—based
(3)
routing.Although successful,and obviously widely deployed,certain restrictions,which have been realized for some time,exist for this method of packet forwarding that diminish its
(4)
.New techniques are therefore required to address and expand the functionality of an IP—based network infrastructure.This first chapter concentrate on identifying these restrictions and presents a rew,architecture,known as multipIeprotocol
(5)
switching,that provides solutions to some of these restrictions.
(5)
选项
A、const
B、cast
C、mark
D、label
答案
D
解析
当数据包从其来源到其最终目的地址时,传统的IP报文转发分析包含在每一个数据包的网络层报头的目的IP地址。路由器独立地分析网络中的每一跳目标IP地址。动态路由协议或静态配置生成所需的数据库来分析目标IP地址(路由表)。传统的IP路由实现的过程也被称为基于逐跳目的地的单播路南。虽然成功地广泛采用,但是一些已经实现一段时间的限制仍存在,此方法存在报文的转发减少其灵活性。因此,需要新的技术,以处理和扩展一个基于IP的网络基础设施的功能。第一章着重识别这些限制,并提出了一种新的架构,被称为多协议标签交换,来提供解决这些限制的方法。
转载请注明原文地址:https://kaotiyun.com/show/d6DZ777K
本试题收录于:
网络工程师上午基础知识考试题库软考中级分类
0
网络工程师上午基础知识考试
软考中级
相关试题推荐
操作系统执行系统调用的过程包括如下主要操作:①返回用户态②执行陷入(trap)指令③传递系统调用参数④执行相应的服务程序正确的执行顺序是(35)________。
为了在传统电视上实现ITV的功能,一般使用机顶盒(Set-TopBox)设备。下图是一个机顶盒的应用结构图。请简单解释机顶盒中下列功能单元的基本构成及作用:网络接口和通信单元,处理单元,音频视频单元,图形单元,外设控制单元。(
阅读下列说明,回答问题1至问题5,将答案填入答题纸的对应栏内。[说明]某研发团队想利用屏幕录像的方法制作一个软件项目汇报演示视频,其中包含10分钟的基于幻灯片形式的项目完成情况讲解和3分钟的成果软件演示。在成果软件演示阶段,要求采用一段MP3格式的声音
操作数所处的位置,可以决定指令的寻址方式。操作数包含在指令中,寻址方式为(4);操作数在寄存器中,寻址方式为(5);操作数的地址在寄存器中,寻址方式为(6)。
高级程序设计语言中用于描述程序中的运算步骤、控制结构及数据传输的是(18)。
在指令系统的各种寻址方式中,获取操作数最快的方式是(4)。若操作数的地址包含在指令中,则属于(5)方式。
若内存地址区间为4000H~43FFH,每个存贮单元可存储16位二进制数,该内存区域由4片存储器芯片构成,则构成该内存所用的存储器芯片的容量是(6)。
阅读以下说明,回答问题1至问题3。【说明】随着企业网络应用时间的延长和网络应用数据量的不断增大,各企业已明显感觉到自己的服务器存储容量和存储性能滞后企业网络应用需求的发展,特别是那些流媒体企业,如电信、金融、多媒体网站、电视台、唱片公司等,越来越
常用的统计编码方法包括哈夫曼编码和算术编码,其中(41)。
某单位有一个100台机器的大机房,要实现每一台计算机都上网,一般认为,用代理是一个办法,但是工作量比较大,要为每一台机器分别安装客户端软件,而且还要设置IP地址、网关、DNS服务器等。此外,还有一个不错的方法,那就是建立NAT服务器,在服务器上配置DNS
随机试题
不符合新月体性肾小球肾炎的描述是
下列综合征是鼻中隔偏曲表现之一的是
下列说法错误的是()。
深层平极载荷试验的试验深度不应小于()m。
对竣工时遗留的或试车中发现必须新增的安全、()保护措施,要安排投资和材料限期完成。
计算机网络的功能有()。
设f(u)连续,则∫0xdu∫uxvf(u2-v2)dv=_________.
办公软件中的字体在操作系统中有对应的字体文件,字体文件中存放的汉字编码是:
A、 B、 C、 B
SaltThegovernmentwatchdog,TheFoodStandardsAgency,hasannouncedtargetsforreducingsaltinarangeoffoodproducts.Th
最新回复
(
0
)