在Cisco路由器上执行一条命令后得到下列信息 Routing Protocol is”rip” Sending update severy 30 seconds,next due in 1 6 seconds Invalid after l 80 sec

admin2021-06-16  28

问题 在Cisco路由器上执行一条命令后得到下列信息
Routing Protocol is”rip”
Sending update severy 30 seconds,next due in 1 6 seconds
Invalid after l 80 seconds,holddown 1 80,flushed after 240
Out going update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Redistributing:rip
Routing for Networks:
202.1 12.7.0
202.112.7.0
Passive Interface(S):
Ethernet0
Routing Information Sources:
Gateway Distance Last Update
202.112.7.32 120 4w4d
Distance:(default is 120)
那么该路由器执行的命令是(    )。

选项 A、Router#show configuration
B、Router#show flash
C、Router#show ip protocols
D、Router#show ip route

答案C

解析 Routing Protocol"rip”(路由协议是rip)知本题主要功能是查看路由协议。选项A是查看路由器配置,选项B是查看flash,选项c是查看路由协议的详细信息,选项D是查看路由表。故选c选项。
转载请注明原文地址:https://kaotiyun.com/show/e0OZ777K
0

最新回复(0)