首页
外语
计算机
考研
公务员
职业资格
财经
工程
司法
医学
专升本
自考
实用职业技能
登录
计算机
The purpose of the requirements definition phase is to produce a clear, complete, consistent, and testable(71)of the technical r
The purpose of the requirements definition phase is to produce a clear, complete, consistent, and testable(71)of the technical r
admin
2012-03-08
32
问题
The purpose of the requirements definition phase is to produce a clear, complete, consistent, and testable(71)of the technical requirements for the software product.
During the requirements definition phase, the requirements definition team uses an iterative process to expand a broad statement of the system requirements into a complete and detailed specification of each function that the software must perform and each(72)that it must meet. The starting point is usually a set of high-level requirements from the(73)that describe the project or problem.
In either case, the requirements definition team formulates an overall concept for the system and the defines(74)showing how the system will be operated, publishes the system and operation concept documents, and conducts a system concept review(SCR).
Following the SCR, the team derives(75)requirements for the system from the high level requirements and the system operations concept. Using structured or object-oriented analysis, the team specifies the software functions and algorithms needed to satisfy each detailed requirements.
选项
A、detailed
B、outlined
C、total
D、complete
答案
A
解析
需求定义阶段的作用就是为软件产品产生一个清晰的、完整的、一致的、可测试的技术需求规格说明。
在需求定义阶段,需求定义团队通过迭代过程把有关系统需求的宽泛的陈述扩展成系统必须实现的各个功能的、完整而详细的规格说明,以及系统应该满足的各种准则。这个过程的起点通常是由用户提供的描述项目或问题的一组高级需求。
在任何情况下,需求定义团队应该阐明与系统有关的整体概念,并且设定一种能够显示系统如何运作的情景,发布有关系统和运行的概念文件,并进行系统概念的评审(SCR)。
在SCR之后,团队应该根据高级需求和系统运行概念导出详细的系统需求。通过结构化的或面向对象的分析技术,团队可以规范系统功能,说明满足每一细节需求的算法。
转载请注明原文地址:https://kaotiyun.com/show/sxJZ777K
本试题收录于:
网络工程师上午基础知识考试题库软考中级分类
0
网络工程师上午基础知识考试
软考中级
相关试题推荐
简述SOAP的组成部分。
利用等价类的划分,为判断其中任意两个数之和应大于第3个数是否为三角形的条件建立等价类表。
原型化(Prototyping)方法是一类动态定义需求的方法,(1)不是原型化方法所具有的特征。与结构化方法相比,原型化方法更需要(2)。衡量原型开发人员能力的重要标准是(3)。
OMT定义了三种模型来描述系统。(1)可以用状态图来表示;(2)可以用数据流图来表示。(3)为上述两种模型提供了基本的框架。
SSL协议在运行过程中可分为六个阶段:①交换密码阶段②建立连接阶段③检验阶段④会谈密码阶段⑤客户认证阶段⑥结束阶段。其正确的流程顺序是:()
CtoB模式的个人交易形式的最大特点是()。
图6-7电路原理图中有哪几种模拟电压输入?若12位逐次逼近式A/D转换芯片AD574A的满量程电压为10V,非线性误差小于土1/2LBS,其最小有效位的量化单位为9.77mV,求该A/D转换芯片的绝对精度。请列出简要计算过程。
某计算机数据总线为16位,内存按字节编址,地址从B4000H到DBFFFH,共有(59)字节。若用存储容量为16KX16bit的存储器芯片构成该内存,至少需要(60)片。(60)
在采用结构化开发方法进行软件开发时,设计阶段接口设计主要依据需求分析阶段的(15)。接口设计的任务主要是(16)。(15)
随机试题
水平荷载作用下,多层框架结构的侧移主要由
对于正常人胃液的叙述,恰当的是
关于对比剂水溶性的描述,错误的是
诊断为猩红热,出疹期最有意义的是
A.氨茶碱B.布地奈德C.酮替芬D.异丙托溴铵E.孟鲁司特建议长期进行治疗的慢阻肺的患儿需监测身高的是()。
关于项目经理的说法,正确的是()。
燃烧按照其形成的条件和发生瞬间可分为()。
以下()体现了特别行政区的高度自治。
在面向对象技术中,多态有多种不同的形式,其中(1)和(2)称为通用多态,(3)和强制多态称为特定多态。
表达式{1999-12-20)>{1999-12-10}的结果为______。
最新回复
(
0
)